Advanced Soybean Inoculation Solution for Sustainable Agriculture
This technology is a solid inoculant, which contains the industry-standard strain USDA 110 and includes a gum Arabic adhesive and user instructions. It is packed in 100 g packets sufficient for 10 to 15 kg soybean seed.
This technology is TAAT1 validated.
Positive or neutral impact
Positive or neutral impact
ORG specific text
In the meantime, use the “Request information” button if you need to contact us.
For the purchase of 100g
Profit per unit for retailers
To build the NoduMax factory
To equip the NoduMax factory
Unknown
Country | Tested | Adopted |
---|---|---|
Benin | –Not tested | Adopted |
Ghana | –Not tested | Adopted |
Mozambique | –Not tested | Adopted |
Nigeria | –Not tested | Adopted |
Togo | –Not tested | Adopted |
This technology can be used in the colored agro-ecological zones. Any zones shown in white are not suitable for this technology.
AEZ | Subtropic - warm | Subtropic - cool | Tropic - warm | Tropic - cool |
---|---|---|---|---|
Arid | ||||
Semiarid | ||||
Subhumid | ||||
Humid |
Source: HarvestChoice/IFPRI 2009
The United Nations Sustainable Development Goals that are applicable to this technology.
Preparation of Adhesive Solution: Dissolve the gum Arabic adhesive in clean, hot water.
Coating Soybean Seeds: Apply the adhesive solution to 10 to 15 kg of soybean seeds, ensuring an even coating on the seed exterior.
Inoculation with NoduMax: Add the inoculant to the adhesive-coated seeds. Mix until the inoculant appears as a fine brown powder, uniformly distributed on the seeds.
Planting Seeds: Plant the inoculated seeds shortly after application, ensuring they are protected from direct sunlight.
Last updated on 22 May 2024