Logo
TAAT e-catalog for government
https://e-catalogs.taat-africa.org/gov/technologies/zainer-low-cost-zai-field-preparation
Request information View pitch brochure

Zainer: Low-cost Zai field preparation

Zainer

The Zainer is a lightweight vertical soil drill mounted on a two-wheeled cart and powered by a small 5 hp petrol engine. It is designed to mechanize the production of Zai planting holes by drilling to a depth of approximately 25 cm in about 4 seconds per hole. The machine creates up to 17 Zai pits per minute, enabling land preparation of 1 hectare in roughly 40 working hours. During operation, excavated soil is deposited on the downstream side of each pit to direct runoff water into the hole for improved infiltration. The Zainer is fuel-efficient, easy to operate by both men and women, and can be maintained locally by welders and small engine repairers, with an operational lifespan of about five years under minimal maintenance.

2

This technology is pre-validated.

9•9

Scaling readiness: idea maturity 9/9; level of use 9/9

Adults 18 and over: Positive high

Youth and adults can safely use the technology

The poor: Positive high

Provides a cost-efficient means of land preparation under rainfed cereal system

Women: Positive high

Women can safely use the technology

Climate adaptability: Highly adaptable

The technology enables the resilience of the rainfed system and adaptation to climate change impacts.

Farmer climate change readiness: Significant improvement

Enables in-situ water harvesting that improves soil moisture and water infiltration in dry environment

Biodiversity: Positive impact on biodiversity

Water use: More water used

The technology enabled water harvesting to make more water available in dry season

Problem

  • High labor intensity: Manual land preparation of Zai pits is extremely labor-intensive, requiring up to 300 hours per hectare, which discourages many farmers despite the agronomic benefits.
  • Low adoption of water harvesting practices: The physical demands and time required to dig Zai pits limit the large-scale adoption of soil moisture conservation practices in arid areas.
  • Time constraints for land preparation: Manual methods delay field preparation, reducing the effectiveness of rain-fed cropping systems in the face of short climatic windows.
  • Financial barrier to individual ownership: The cost of purchasing a Zainer remains high for individual smallholders, making a collective or mechanized service approach necessary.
  • Limited access to mechanized services: In the absence of equipped service providers or cooperatives, many small producers remain dependent on inefficient traditional methods.

Solution

  • Fast and efficient land preparation: The Zainer mechanizes the digging of Zai pits, allowing 1 hectare to be completed in 5 days of 8hours/day compared to 300 hours or 37.5 working days of 8 hours/day of manual labor, greatly improving productivity.
  • Reduction in the drudgery of work: Motorization limits physical effort, facilitating the adoption of water conservation practices by small-scale farmers.
  • Improved water and soil management: Zai pits promote runoff infiltration and soil moisture conservation in arid areas.
  • Suitable for small farms and agricultural services: Lightweight and easy to handle, the Zainer can be used by men and women, individually or through service providers.
  • Economically viable solution: Optimized for fuel consumption and drilling speed, it reduces operating costs and supports profitable service models.

Key points to design your project

The Zainer provides an efficient and cost-effective solution for Zai pit creation, reducing labor requirements and enabling timely land preparation for smallholder farmers. By mechanizing Zai pit drilling, it supports soil moisture conservation, climate resilience, and improved crop productivity, contributing to Sustainable Development Goals (SDGs) on food security, sustainable agriculture, and rural livelihoods.

  • Cost analysis:
    One Zainer unit covers 1 hectare in 5 days (8 hours/day). Cooperative or service-provider ownership allows multiple farmers to access the technology, spreading costs and maximizing benefits.
  • Supply and logistics:
    Identify reliable suppliers for Zainer machines, spare parts, and small petrol engines. Plan for transport to farming communities and ensure local availability of maintenance services.
  • Training and support:
    Train operators and farmers on safe handling, drilling operations, engine maintenance, and proper pit spacing to ensure consistent and effective Zai pit creation.
  • Communication and awareness:
    Develop demonstration plots, manuals, and videos to show farmers the efficiency and benefits of mechanized Zai pit preparation, highlighting time savings and improved soil moisture retention.
  • Technical requirements:
    Ensure fields are accessible, leveled, and suitable for Zai pit drilling. Follow recommended spacing (25–30 cm) and pit depth (25 cm) to optimize water harvesting and crop performance.

By following these guidelines, Zainer can be successfully integrated into smallholder farming projects, enhancing land preparation efficiency, labor savings, and climate-resilient agricultural practices.

Cost vs. revenue

Data reliability of this estimate: 60 %

Return on investment 13 %

Every USD invested returns USD 0.13 net income.

Detailed financial information ›

IP

No formal IP rights

Scaling Readiness describes how complete a technology’s development is and its ability to be scaled. It produces a score that measures a technology’s readiness along two axes: the level of maturity of the idea itself, and the level to which the technology has been used so far.

Each axis goes from 0 to 9 where 9 is the “ready-to-scale” status. For each technology profile in the e-catalogs we have documented the scaling readiness status from evidence given by the technology providers. The e-catalogs only showcase technologies for which the scaling readiness score is at least 8 for maturity of the idea and 7 for the level of use.

The graph below represents visually the scaling readiness status for this technology, you can see the label of each level by hovering your mouse cursor on the number.

Read more about scaling readiness ›

Scaling readiness score of this technology

Maturity of the idea 9 out of 9

Uncontrolled environment: validated

Level of use 9 out of 9

Common use by intended users, in the real world

Maturity of the idea Level of use
9
8
7
6
5
4
3
2
1
1 2 3 4 5 6 7 8 9

Cost of the investment
Sum of all fixed and operational expenses.
USD 1,600
per hectare
Gross revenue
Sum of all income before subtracting costs.
USD 1,800
per hectare
Net income
Gross revenue minus total cost.
USD 200
per hectare
Return on investment
Percentage of income earned for each dollar invested, calculated as:
(income ÷ cost of investment) × 100
13 %
per hectare

References:

  • Template for Cost, Revenue and ROI calculation for TAAT technologies_Zainer.xlsx (XLSX, 28.08 KB)
  • Countries with a green colour
    Tested & adopted
    Countries with a bright green colour
    Adopted
    Countries with a yellow colour
    Tested
    Countries with a blue colour
    Testing ongoing
    Egypt Equatorial Guinea Ethiopia Algeria Angola Benin Botswana Burundi Burkina Faso Democratic Republic of the Congo Djibouti Côte d’Ivoire Eritrea Gabon Gambia Ghana Guinea Guinea-Bissau Cameroon Kenya Libya Liberia Madagascar Mali Malawi Morocco Mauritania Mozambique Namibia Niger Nigeria Republic of the Congo Rwanda Zambia Senegal Sierra Leone Zimbabwe Somalia South Sudan Sudan South Africa Eswatini Tanzania Togo Tunisia Chad Uganda Western Sahara Central African Republic Lesotho
    Countries where the technology is being tested or has been tested and adopted
    Country Testing ongoing Tested Adopted
    This technology has not been tested or adopted in any country.

    This technology can be used in the colored agro-ecological zones. Any zones shown in white are not suitable for this technology.

    Agro-ecological zones where this technology can be used
    AEZ Subtropic - warm Subtropic - cool Tropic - warm Tropic - cool
    Arid
    Semiarid
    Subhumid
    Humid

    Source: HarvestChoice/IFPRI 2009

    The United Nations Sustainable Development Goals that are applicable to this technology.

    Sustainable Development Goal 2: zero hunger
    Goal 2: zero hunger

    This technology supports food security and sustainable agriculture goals.

    1. Prepare the Machine
      Ensure the Zainer is in good condition, with the drill bit clean and oiled. Check fuel levels in the 5 hp petrol engine.
    2. Position at the Field
      Move the Zainer to the field and place it at the starting point according to the crop spacing (e.g., 25–30 cm between Zai pits).

    3. Operate the Drill
      Start the engine and press the drill bit into the soil to the desired depth (25 cm). Move to the next planting point and repeat until the field is complete.

    4. Monitor and Adjust
      Ensure consistent pit depth and spacing while drilling. Adjust engine speed or operator technique if necessary for uniform holes.

    5. Clean and Maintain
      After completing field operations, remove dirt and moisture from the machine. Oil the drill bit and other moving metal parts to prevent rust. Perform regular maintenance for long-term operation.

    Downloads

    Last updated on 27 April 2026